House cleaning quote calculator

Price a house cleaning job by bedrooms, bathrooms, square footage, frequency, and add-ons. Defaults are labeled starting points, with Angi, Thumbtack, and ISSA figures for context.

How to price a house cleaning job without guessing

A cleaning quote should start from the home in front of you, not from a number you saw in a Facebook group. This calculator is for cleaning business owners who want a consistent way to price a standard clean, a deep clean, a move-out, or a first visit. It is a planning tool. It does not pull live prices for your city, and it does not replace a walkthrough when a home is unusually cluttered, hoarded, or left after construction.

What published market figures actually say

Angi, drawing on 98,643 verified projects, reported a 2026 national average of $176 per professional house cleaning visit, with most homeowners paying $118 to $239. Angi also describes standard cleaning at roughly $0.10 to $0.20 per square foot, deep cleaning up to $0.25, and move-out work up to $0.35. Thumbtack’s 2026 guide reports a wider overall range of $185 to $324, and a $220 average for a three-bedroom, two-bathroom home. Those figures mix many markets and scopes, so they are a gut check, not your price list.

The default quote — $235 for a 3-bedroom, 2-bathroom, 1,800-square-foot standard one-time clean — is built from the editable rates below, not a national average. It sits near Thumbtack’s 3-bed, 2-bath figure. If your market is higher or lower, change the rates.

How this calculator builds a quote

You can price from bedrooms and bathrooms, from square footage, or from both. Combined mode takes the higher of the two results so a large, open floor plan or a small home with many bathrooms is less likely to fall under your labor. The starting rates are:

  • A base visit of $80, plus $25 per bedroom and $40 per bathroom. Those room rates are assumptions, informed by Angi 2026 comments that additional bedrooms often add about $25 to $35 and additional bathrooms about $10 to $40. A 3-bed, 2-bath home then starts at $235 before frequency or add-ons.
  • $0.12 per square foot for a standard clean, which sits inside Angi 2026’s $0.10 to $0.20 standard range.
  • A minimum visit of $125, an assumption in the $100 to $150 area many owners use so a studio does not pay for travel and setup at a loss.
  • Service multipliers of 1.5 for a deep clean or first visit and 1.75 for move-out work. Those are assumptions; the exact gap depends on the tasks you include.
  • Frequency adjustments of 15% off for weekly service, 10% off for biweekly service, and no discount for every-four-weeks service. Recurring work is easier to staff, but a monthly home often has more buildup. These percentages are assumptions. Change them if your books say otherwise.

Add-ons such as an inside oven or interior windows are added after the service multiplier and before the frequency discount, so a weekly client still gets the visit discount on extras included that day. After that, the minimum is applied. Inside-oven ($30), refrigerator ($25), laundry ($12), cabinet ($35), and baseboard ($50) defaults sit at the midpoint of Angi 2026 add-on ranges. Interior windows ($55) and pet hair ($25) are flat assumptions, because Angi prices windows per pane and does not publish a pet-hair unit price.

Check the quote against time, not only against a competitor

A price that looks competitive can still be too low if the visit runs long. ISSA has published national industry averages of about 650 to 750 square feet per hour for routine biweekly cleaning and about 500 square feet per hour for an initial clean (ISSA, 2019). Those are starting points from a trade-association article, not a measurement of your team. This tool defaults to 500 square feet per cleaner-hour so you do not assume a fast pace on a first visit. It then shows estimated cleaner-hours and the revenue per cleaner-hour implied by your quote. If that hourly figure is close to what you pay a cleaner, the job is not priced — it is subsidized. Hours here come from square footage only; add-ons may take extra time that you should add in your head or after a walkthrough.

Use the cleaning profit and hourly rate calculator to load employer payroll taxes, unemployment, workers’ compensation, supplies, vehicle cost, and overhead into a required bill rate. The quote calculator tells you a customer price. The profit calculator tells you whether that price leaves anything after the real cost of a cleaner-hour.

What to do before you send the number

  • Confirm the service list in writing. “Standard clean” means different rooms and different appliances from one company to the next. The checklist generator can turn that list into a crew sheet.
  • Walk unusual homes. Pets, untreated floors, heavy grease, and move-out debris change time more than a bedroom count does.
  • Recalibrate your production rate from your last 10 ordinary jobs: total square feet divided by total cleaner-hours, skipping the messy outliers.
  • Revisit rates when wages, insurance, or drive time change, not only when a competitor posts a special.

When you want the quote, the checklist, and the invoice to live on the same client record — and to be sent without rebuilding the math in a notes app — you can start a 30-day Pro trial of TidyWise. A card is required. Plans are $49, $97, or $197 a month for unlimited staff, with no per-user fees and no setup fee.

Frequently asked questions

Is this house cleaning quote calculator free?

Yes. It is free to use, with no account and no email gate. The math runs in your browser.

Is the recommended quote what I should charge in my city?

No. It is a planning estimate from your inputs and the editable rates on this page. Angi and Thumbtack 2026 figures in the market-context note are national ranges, not a local price list. Change the rates to match your costs and your market, then confirm unusual homes in person.

Should I price by the room, by the square foot, or by the hour?

Use rooms or square footage to build a flat quote the client can accept, and use hours as a check. Combined mode takes the higher of the beds-and-baths total and the square-footage total so you are less likely to underprice. The implied revenue per cleaner-hour is the hourly check. If you still prefer to bill hourly, you can, especially on first visits and move-outs with unknown conditions.

Why is the default production rate 500 square feet per hour?

ISSA (2019) has cited about 500 square feet per hour for an initial clean and 650 to 750 square feet per hour for routine biweekly work. The default uses the slower figure so hours are not understated. Replace it with your own average from recent jobs.

How do weekly and biweekly discounts work here?

By default, weekly visits are 15% off the one-time figure and biweekly visits are 10% off. Every-four-weeks visits have no discount, because buildup is often higher. Those percentages are assumptions. Edit them under “Edit your rates.” Add-ons are included before the frequency factor, so they receive the same visit discount.

Does this calculator include sales tax or travel fees?

No. Add tax on the invoice if your state charges it on cleaning services. If you charge a trip fee, add it as a custom add-on or raise the minimum visit.

Can I turn this quote into an invoice or a contract?

You can copy the summary and paste the total into the cleaning invoice generator or the contract generator. TidyWise can also keep the quote on the client record if you start a trial.

Turn a quote into a job on the calendar

When you want this price to live on the client record, with scheduling, invoicing, and online booking in the same place, you can start a 30-day Pro trial of TidyWise. A card is required. Plans are $49, $97, or $197 a month for unlimited staff, with no per-user fees and no setup fee.

Start a 30-day Pro trial